Blinky LED Sea Turtle Pin


“I be Lucy, pirate captain of the sea. Me loves jewels and sunshine and me peg-leg!”

Watch them in action below.

Lucy has 4 glittering LED jewels on her back, powered by 5 tiny solar cells. No need for her to go ashore, ever.  A silver pin is bonded onto the back and she is sealed in epoxy to protect her from salt water.

Size: 2″ wide by 2″ tall
Solar Charge Time: 15 minutes
Optional USB Charge Time: 2 minutes
Lifespan in Darkness: 3+ hours

Out of stock


And don’t fret if you’re not super tech-savvy — we’’ll include all the details and directions with the piece, so you can get the very most out of your jewelry. 

Operation:  I’m alive, I’m ALIVE!                                                                                                   

  1. Flip the switch to the side labeled “Direct”. The power storage capacitors are disconnected and I get my energy directly off the surrounding light. Sunlight is best, but not the only source I like.
  2. Flip the switch to the side labeled “Store” to store solar energy or run off of internal storage.  The storage capacitor is now connected.
    1. Solar – find a light source I like and leave me under it for 45 minutes.
    2. Optional USB – plug me in. Wait 4 minutes until the blue/white light comes on.  I’m full!
  3. Store my energy for later by flipping the switch to the side labeled “Direct”.

 Endurance: In “Store” I’ll run about 3+ hours on a full charge. In “Direct” I’ll blink as long as the room is bright.

Additional information

Weight 0.07 lbs
Dimensions 4 × 4 × 1 in